Aquael Easyheater 50w Aquarium heater, unbreakable and super thin.
EASYHEATER is a technologically advanced device whose housing is made of special composite plastic.
This makes the heater unbreakable and highly resistant even to strong
impacts. The device is also noticeable for its functional shape: it is
flat, thin and small in size, which means that it can be easily made
inconspicuous in an aquarium. Thanks to the handy double hanger, the
heater can be mounted on any of the aquarium walls. The freedom of
installation is further increased by the fact that EASYHEATER can
operate in any position, horizontal as well as vertical.
can precisely set the desired temperature by means of a large ergonomic
dial with an expanded temperature scale ranging from 17 to 36º C.
The accuracy of the automatic thermostat is within ± 1° C. The operation
of the heater is signalled by three LEDs on the top and front of the
housing. The LEDs are automatically switched on at the start of a
heating cycle, allowing you to monitor the device. EASYHEATER is
equipped with a thermal safety switch. It is intended to prevent the
device from breaking down or causing a fire hazard in the event of the
heater being accidentally switched on when out of water or if there is
an uncontrolled water leakage from the tank. In a situation like that,
the thermal safety switch will turn the heater off automatically. After
the heater has cooled, it will be switched back on, again automatically. The
conductivity parameters of the plastic used to manufacture the housing
have been carefully chosen so that fish or humans do not get burnt if
their skin comes in contact with the surface of a working heater (the
surface of the housing will immediately cool down when touched). Thanks
to its advanced design, the EASYHEATER make of aquarium water heaters
guarantees an exceptionally high level of operational safety.
50w heater can heat up to 50lts of water to temperatures of 18 to 36c.